[ ubuntu ] docker


1) install

$ curl -fsSL https://get.docker.com/ | sh

2) add your current user [suppose you’re logged in as dsin] to docker group

sudo usermod -aG docker dsin

then logout & login again
ref : http://stackoverflow.com/questions/33562109/docker-command-cant-connect-to-docker-daemon

3) check docker version

$ docker version

pull + run hello-world image


test to load `hello-world` `image` to the `container`

  • The first time you run a software `image`, the docker command looks for it on your local system. If the image isn’t there, then docker gets it from the hub.
  • Docker only downloads the image again if the image’s source changes on the hub.
  • Using Docker Engine, you don’t have to worry about whether your computer can run the software in a Docker image — a Docker container can always run it.
  • image from the docker hub is at https://hub.docker.com
$ docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
535020c3e8ad: Pull complete
af340544ed62: Pull complete
Digest: sha256:a68868bfe696c00866942e8f5ca39e3e31b79c1e50feaee4ce5e28df2f051d5c
Status: Downloaded newer image for hello-world:latest

Hello from Docker.
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker Engine CLI client contacted the Docker Engine daemon.
 2. The Docker Engine daemon pulled the "hello-world" image from the Docker Hub.
 3. The Docker Engine daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker Engine daemon streamed that output to the Docker Engine CLI client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker Hub account:

For more examples and ideas, visit:

ref : https://docs.docker.com/linux/step_one/


pull + run `docker/whalesay` `image`

$ docker run docker/whalesay cowsay boo
Unable to find image 'docker/whalesay:latest' locally
latest: Pulling from docker/whalesay
e9e06b06e14c: Pull complete
a82efea989f9: Pull complete
37bea4ee0c81: Pull complete
07f8e8c5e660: Pull complete
676c4a1897e6: Pull complete
5b74edbcaa5b: Pull complete
1722f41ddcb5: Pull complete
99da72cfe067: Pull complete
5d5bd9951e26: Pull complete
fb434121fc77: Already exists
Digest: sha256:d6ee73f978a366cf97974115abe9c4099ed59c6f75c23d03c64446bb9cd49163
Status: Downloaded newer image for docker/whalesay:latest
< boo >
 ## .
 ## ## ## ==
 ## ## ## ## ===
 /""""""""""""""""___/ ===
 ~~~ {~~ ~~~~ ~~~ ~~~~ ~~ ~ / ===- ~~~
 \______ o __/
 \ \ __/
$ docker run docker/whalesay cowsay boo-boo
< boo-boo >
 ## . 
 ## ## ## == 
 ## ## ## ## === 
 /""""""""""""""""___/ === 
 ~~~ {~~ ~~~~ ~~~ ~~~~ ~~ ~ / ===- ~~~ 
 \______ o __/ 
 \ \ __/ 

list all local images

$ docker images
docker/whalesay latest fb434121fc77 3 hours ago 247 MB
hello-world latest 91c95931e552 5 weeks ago 910 B

Build own image


FROM docker/whalesay:latest
RUN apt-get -y update && apt-get install -y fortunes
CMD /usr/games/fortune -a | cowsay

– The FROM keyword tells Docker which image your image is based on
– install fortunes program to the image
The fortunes program has a command that prints out wise sayings for our whale to say. So, the first step is to install it. This line installs the software into the image.
– instruct the software to run when the image is loaded ( pass a nifty quote to the cowsay program )

2) build

`docker build` takes the Dockerfile in the current directory and builds an image called docker-whale on your local machine

$ docker build -t docker-whale .
Sending build context to Docker daemon 158.8 MB
Removing intermediate container a8e6faa88df3
Successfully built 7d9495d03763

3) run

docker run docker-whale

Sharing image file into docker’s repository

1) go to https://hub.docker.com and `create repository`
2) find image id for your docker-whale image.

$ docker images
docker-whale latest 7d9495d03763 38 minutes ago 273.7 MB
docker/whalesay latest fb434121fc77 4 hours ago 247 MB
hello-world latest 91c95931e552 5 weeks ago 910 B

3) tag

$ docker tag 7d9495d03763 dsin/docker-whale-test:latest


7d9495d03763 : imageid
latest : version or tag

4) type `docker images` command again to see your newly tagged image

$ docker images
maryatdocker/docker-whale latest 7d9495d03763 5 minutes ago 273.7 MB
docker-whale latest 7d9495d03763 2 hours ago 273.7 MB
docker/whalesay latest fb434121fc77 5 hours ago 247 MB
hello-world latest 91c95931e552 5 weeks ago 910 B

5) login

$ docker login --username=dsin--email=mary@docker.com
WARNING: login credentials saved in C:\Users\sven\.docker\config.json
Login Succeeded

6) push

$ docker push dsin/docker-whale-test
The push refers to a repository [dsin/docker-whale-test] (len: 1)
7d9495d03763: Image already exists
c81071adeeb5: Image successfully pushed
eb06e47a01d2: Image successfully pushed
fb434121fc77: Image successfully pushed
5d5bd9951e26: Image successfully pushed
99da72cfe067: Image successfully pushed
1722f41ddcb5: Image successfully pushed
5b74edbcaa5b: Image successfully pushed
676c4a1897e6: Image successfully pushed
07f8e8c5e660: Image successfully pushed
37bea4ee0c81: Image successfully pushed
a82efea989f9: Image successfully pushed
e9e06b06e14c: Image successfully pushed
Digest: sha256:ad89e88beb7dc73bf55d456e2c600e0a39dd6c9500d7cd8d1025626c4b985011

Remove image

You can use an ID or the name to remove an image.

$ docker rmi -f 7d9495d03763

$ docker rmi -f docker-whale

Setup automate build on Docker hub


Explore repository

$ docker search ubuntu


For example, you can trigger an automated test or deployment to happen as soon as the image is available.

A webhook is called only after a successful push is made. The webhook calls are HTTP POST requests with a JSON payload.

Webhook chains

For example, you can use this to trigger a deployment of your container only after it has been successfully tested, then update a separate Changelog once the deployment is complete. After clicking the “Add webhook” button, simply add as many URLs as necessary in your chain.
The first webhook in a chain will be called after a successful push. Subsequent URLs will be contacted after the callback has been validated.

In order to validate a callback in a webhook chain, you need to
1) Retrieve the `callback_url` value in the request’s JSON payload.
2) Send a `POST` request to this URL containing a `valid JSON body`.
Example :

"state": "success",
"description": "387 tests PASSED",
"context": "Continuous integration by Acme CI",
"target_url": "http://ci.acme.com/results/afd339c1c3d27"

state (required): `success`, `failure` or `error`. If the state isn’t success, the webhook chain will be interrupted.
description: will be available on the Docker Hub. Maximum 255 characters.
context: containing the context of the operation. Can be retrieved from the Docker Hub. Maximum 100 characters.
target_url: URL where the results of the operation can be found. Can be retrieved on the Docker Hub.

Automated Builds
1) need to link with GitHub or BitBucket
Profile > Settings > Linked Accounts & Services


  • Automated build repositories rely entirely on the integration with your code repository.
  • You cannot push to these image repositories using the docker push command. You can only change the image by committing to your code repository.
  • If you want to do both, docker push and an automated build, you would create a regular repository for the docker push and an automated build repository.

2) In docker hub, Create > Create Automated Build

  • choose github’s repository
  • choose docker image’s name to create

By default, Docker builds images for each branch in your repository. It assumes the Dockerfile lives at the root of your source. When it builds an image, Docker tags it with the branch name.

NOTE : we can `customize behavior`

  • Specify which code branches/or tags to build from.
  • You can add new configurations by clicking the + (plus sign).
  • The dialog accepts regular expressions. If you use a regular expression syntax (regex) to define your build branch or tag, Docker does not give you the option to manually build.

In GitHub, a Docker integration appears in your repositories Settings > Applications

Settings > Webhooks & Services

In BitBucket, it is at Settings > Services

We should see the POST hook pointing to https://registry.hub.docker.com/hooks/bitbucket.

Automated Builds process

The first time you create a new automated build, Docker Hub builds your image. In a few minutes, you should see your new build on the image dashboard. The Build Details page shows a log of your build systems.

During the build process, Docker copies the contents of your Dockerfile to Docker Hub. The Docker community (for public repositories) or approved team members/orgs (for private repositories) can then view the Dockerfile on your repository page.

The build process looks for a README.md in the same directory as your Dockerfile. If you have a README.md file in your repository, it is used in the repository as the full description. If you change the full description after a build, it’s overwritten the next time the Automated Build runs. To make changes, modify the README.md in your Git repository.

You can only trigger one build at a time and no more than one every five minutes. If you already have a build pending, or if you recently submitted a build request, Docker ignores new requests.

Build statuses

Queued: Queue time varies depending on number of concurrent builds available to you.
Error: Click the row to access the Builds Details screen. The banner at the top of the page displays the last sentence of the log file indicating what the error was. If you need more information, scroll to the bottom of the screen to the logs section.

Repository links

Repository links let you link one Automated Build with another. If one Automated Build gets updated, Docker triggers a build of the other. This makes it easy to ensure that related images are kept in sync. You only need to link one side of two related builds. Linking both sides causes an endless build loop.

automated build repository > Build Settings

`Repository Links` section,

enter an `image repository name`

A remote repository name should be either an official repository name such as `ubuntu` or a public repository name `namespace/repoName`.

Remote Build triggers

To verify everything is working correctly, check the Last 10 Trigger Logs on the page.

Freenode IRC




Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s